User Tools

Site Tools


home:random4

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
home:random4 [2020/11/14 22:51]
admin
home:random4 [2020/11/27 13:28] (current)
admin Edit Youtube links
Line 8: Line 8:
 Particularly plastic and headlights. Wet sanding with even 7000 grit sandpaper isn't enough for a glossy finish, says 3m. Particularly plastic and headlights. Wet sanding with even 7000 grit sandpaper isn't enough for a glossy finish, says 3m.
  
-{{youtube>Qb8XF4RLbhE?medium}}+YouTube Link! https://www.youtube.com/watch?v=Qb8XF4RLbhE
  
 Going to try some blue polishing compound from Harbor Freight. Going to try some blue polishing compound from Harbor Freight.
Line 54: Line 54:
   * Did **NOT** like drilling extra holes for the 90 degree power supply connector, and I don't think the 90 degree on the wall side is necessary either. So use the cables that come along with the power supply, otherwise if white is needed buy the same kind.   * Did **NOT** like drilling extra holes for the 90 degree power supply connector, and I don't think the 90 degree on the wall side is necessary either. So use the cables that come along with the power supply, otherwise if white is needed buy the same kind.
     * If desired to mount power supply in cabinet, can drill an easy fast hole with a 1/2" forstner bit that M&D have.     * If desired to mount power supply in cabinet, can drill an easy fast hole with a 1/2" forstner bit that M&D have.
-  * Need to do strain relief so that you can solder right side up and then flip it under the cabinet a lot easier without breaking stuff. {{youtube>rCZrGZirRkg?medium}}+  * Need to do strain relief so that you can solder right side up and then flip it under the cabinet a lot easier without breaking stuff. YouTube Link! https://www.youtube.com/watch?v=rCZrGZirRkg
   * Give like 3 feet of extra wire so you can do this soldering on the countertop and do any twisting needed. Tape behind the mounted strip   * Give like 3 feet of extra wire so you can do this soldering on the countertop and do any twisting needed. Tape behind the mounted strip
   * Ok to glue, but it'll just soften again when you don't want it to. Pre-solder the wire and the strip, then push them together with needlenose pliers. Then do full glue when done and confirmed electrically working.   * Ok to glue, but it'll just soften again when you don't want it to. Pre-solder the wire and the strip, then push them together with needlenose pliers. Then do full glue when done and confirmed electrically working.
Line 175: Line 175:
 But there are others (https://obscuritory.com/sim/when-simcity-got-serious/), including this gem. But there are others (https://obscuritory.com/sim/when-simcity-got-serious/), including this gem.
  
-{{youtube>mujgvUsO7w8?medium}}+YouTube Link! https://www.youtube.com/watch?v=mujgvUsO7w8
  
  
home/random4.txt · Last modified: 2020/11/27 13:28 by admin